Gauntlet for (Cyborg Beast derivative)假肢模型分享

該假肢模型名稱為Gauntlet for (Cyborg Beast derivative)（該模型僅用于公益，不可用于商業用途）

是fflood在2014年5月3日上傳至Thingiverse網站的目前項目還在更新中。原文地址為（有可能被墻）：https://www.thingiverse.com/thing:262723
數據文件下載鏈接：https://pan.baidu.com/s/1rt9qMgU9yT7eVvrsqbzn7A   提取碼：bn8u
以下為谷歌機翻，不喜勿噴~原文后附

摘要
為了回應Jorge的Cyborg Beast Gauntlet（http://www.thingiverse.com/thing:261462），我做了這個挑戰，因為內部形狀的角形對Shea來說不是很舒服。我也想知道是否有兩套皮帶和更長的長度將幫助Shea不會像她用手一樣快速疲勞。這個手套有Ivan和David的5槽張緊器（http://www.thingiverse.com/thing:232291）融合在它的頂部。手套向上伸出一點，并有兩個魔術貼帶的空間。我使用了四個短的維可牢尼龍搭扣，柔軟的一面“in”。一旦它們穿過內置的槽，我就可以縫上帶子，但是現在我只是在它們上面打孔，然后用縮短的芝加哥螺絲（用珠寶鋸縮短）作為“鉚釘”來固定環。我需要稍微收緊一下循環，因為它們在循環中有很多松弛。我用5毫米厚的泡沫襯在手套的內側，但是在下一個上面會切換到假肢和夾板友好的泡沫，因為它應該是防水的。
有關魔術貼封口的更多信息，請參見http://frankieflood.blogspot.com ... velcro-closure.html。
有關可以通過尺寸，打印和/或裝配機械手幫助有需要的人的位置的更多信息，請加入e-NABLE Google+社區，名為e-NABLE：
https://plus.google.com/communities/102497715636887179986
有關更多信息和故事：
http://enablingthefuture.org
https://www.facebook.com/enableorganization


更多圖片：

原文：
Summary
I made this gauntlet in response to Jorge's Cyborg Beast Gauntlet (http://www.thingiverse.com/thing:261462) as the angular inside shape was not super comfortable for Shea. I'm also wondering if having two sets of straps and longer length will help Shea to not get fatigued as quickly as she uses her hand. This gauntlet has Ivan and David's 5 slot tensioner (http://www.thingiverse.com/thing:232291) fused onto the top of it. The gauntlet goes a bit further up the arm and has room for two velcro straps. I used four short pieces of velcro with the soft side "in". I might sew the straps once they are looped through the built in slots, but for now I just leather punched holes into them and then used shortened Chicago screws (shortened with a jewelers saw) as "rivets" to hold the loops tight. I will need to tighten up the loops a bit as right now they have a lot of slack in the loop. I lined the inside of the gauntlet with 5mm thick foam, but will switch to prosthetic and splint friendly foam on the next one, as it should be waterproof.
See http://frankieflood.blogspot.com ... velcro-closure.html for more information on the velcro closure.
For more information on where to connect with people who can help someone in need with sizing, printing and/or assembly a mechanical hand please join the e-NABLE Google+ Community entitled, e-NABLE:
https://plus.google.com/communities/102497715636887179986
For more information and stories:
http://enablingthefuture.org
https://www.facebook.com/enableorganization