趙宇凡教授-西北工業大學

姓名：趙宇凡
學歷：博士研究生畢業
性別：男
學位：工學博士學位
學院：材料學院
職稱：教授
電子郵箱：zhyf90215@nwpu.edu.cn

西北工業大學材料學院教授、博士生導師，隸屬金屬增材制造與創新設計團隊。國家級青年人才（QM）、秦創原引用高層次創新創業人才、西工大翱翔海外學者。2012年和2015年分別獲西北工業大學學士及碩士學位，2019年獲日本東北大學工學博士學位。2019年至2021年，于日本東北大學金屬材料研究所任助理教授。擔任中國有色金屬學會增材制造技術專業委員會委員、機械工程學會增材制造技術分會青年委員、日本粉體粉末冶金協會3D打印技術委員會委員、JMST等3本SCI期刊青年編委。主要針對金屬增材制造成形質量和組織控制所涉及的科學基礎和技術提升關鍵問題開展研究。在理論分析和優化實驗基礎上，建立了針對增材制造原材料輸送、熔化、凝固各環節的多尺度多物理場耦合數值模擬架構；發展了材料-載能束動態交互機制、非平衡近快速冶金行為、組織形成機理等科學基礎。

獲獎信息
The winning information


1. 陜西省科技工作者創新創業大賽三等獎（排名1，2023年）

2. “互聯網+”大學生創新創業大賽陜西省賽區優秀創新創業導師（高教主+產業命題賽道，2023年）

3. 陜西省“三秦學者”創新團隊（核心成員）

4. 西北工業大學共青團“五四”表彰-青年崗位能手（2024年）

4. 西北工業大學科研建設貢獻獎（2023年）

5. 西北工業大學“十佳輔導員”（2023年）

6. 西北工業大學本科“優秀招生大使”（2022、2023兩年度）

7. 西北工業大學研究生教學成果特等獎（排名9，2023年）

8. 日本東北大學基金會115周年功績獎（2022年）

9. IMR金屬材料研究所青年研究人員國際學術合作獎（2019年）


社會兼職
Social Appointments

·《Journal of Materials Science & Technology》(SCI, Top) 青年編委；

·《Trans. Nonferrous Met. Soc. China》（SCI）青年編委；

·《Additive Manufacturing Frontiers》青年編委；

·中國有色金屬學會增材制造技術專業委員會委員;

·機械工程學會增材制造技術分會青年委員;

·日本粉體粉末冶金協會3D打印技術委員會委員；

·機械工程領域高質量科技期刊分級目錄評審專家





科學研究
Scientific Research

針對金屬增材制造成形質量和組織控制所涉及的科學基礎和技術提升關鍵問題開展研究：

· 多尺度關聯多物理場耦合數值模擬輔助下的金屬增材制造控形控性；

· 材料-載能束動態交互機制、非平衡近快速冶金行為、組織形成機理；

· 金屬/合金粉末特性對增材制造熱質傳遞影響機制；

· 激光光場模式調控的增材制造熔體行為及組織演化機理；

· 測算融合增材制造點陣結構力學性能模擬與預測；

……

主持項目：

1. 國家重點研發計劃青年科學家項目：2023YFB4604000，主持

2. 國家自然科學基金青年項目：52305422，主持

3. 廣東省基礎與應用基礎研究基金項目：2022A1515110242，主持

4. 陜西省自然科學基礎研究計劃一般項目：2022JQ-479，主持 （結題驗收）

5. 凝固技術國家重點實驗室自主研究課題：2023-TS-10，主持

6. 秦創原引用高層次創新創業人才項目：QCYRCXM-2022-225，主持

7. 陜西省秦創原“科學家+工程師”隊伍建設項目：2023KXJ-232 ，首席科學家

8. 西安市科技計劃-高校院所人才服務企業項目，23GXFW0091，主持



學術成果
Academic Achievements

· Shuoqing Shi; Yufan Zhao*; Haiou Yang*, Chewang Jia, Haoyuan Deng, Tianchi Zhang, Xin Lin* and Weidong Huang; Achieving superior strength-plasticity performance in laser powder bed fusion of AlSi10Mg via high-speed scanning remelting, Materials Research Letters, 2024, 12(9): 668-677. (期刊論文)

· Linxu Li;  Haiou Yang*; Yufan Zhao* and Xin Lin; Evolution of microstructure and properties of IN738 alloy under thermal exposure with different post-processing states, Journal of Alloys and Compounds, 2024, 994: 174684. (期刊論文)


· Yufan Zhao*; Mengyu Wang; Yuchao Lei; Yaru Fan; Aitang Xue; Xin Lin*; Fabrication of heterostructured Ti alloys with exceptional strength and ductility by direct laser deposition, Journal of Materials Research and Technology, 2024, 28: 1597-1610. (期刊論文)

· Yufan Zhao; Kenta Aoyagi*; Kenta Yamanaka; Akihiko Chiba; Processing condition dependency of increased layer thickness on surface quality during electron beam powder bed fusion, Journal of Materials Research and Technology, 2023, 26: 5264-5279. (期刊論文)

· Yanfang Wang; Xin Lin*; Yufan Zhao*; Zihong Wang; Xiaobin Yu; Xuehao Gao; Weidong Huang; Laser powder bed fusion of Zr-modified Al-Cu-Mg alloy: Processability and elevated-temperature mechanical properties, Journal of Materials Science & Technology, 2023, 136(10): 223-235. (期刊論文)

· Yanfang Wang; Xin Lin*; Yufan Zhao*; Qijuan Dong; Shuoqing Shi; Xuehao Gao; Haiou Yang; Weidong Huang; Microstructure and strengthening mechanisms of Zr-modified Al–Cu–Mg alloy processed by selective laser melting, Materials Science and Engineering: A, 2023, 870:144874. (期刊論文)

· Yufan Zhao; Kenta Aoyagi*; Yujie Cui; Kenta Yamanaka; Akihiko Chiba; Multiscale heat transfer affected by powder characteristics during electron beam powder-bed fusion, Powder Technology, 2023, 421: 118438. (期刊論文)


· Yufan Zhao; Kenta Aoyagi*; Kenta Yamanaka; Akihiko Chiba; A survey on basic influencing factors of solidified grain morphology during electron beam melting, Materials & Design, 2022, 221: 110927. (期刊論文)

· Yufan Zhao; Huakang Bian*; Hao Wang; Kenta Aoyagi; Kenta Yamanaka; Akihiko Chiba*; Non-equilibrium solidification behavior associated with powder characteristics during electron beam additive manufacturing, Materials & Design, 2022, 221: 110915. (期刊論文)

· Yufan Zhao; Yujie Cui*; Yusaku Hasebe; Huakang Bian; Kenta Yamanaka; Kenta Aoyagi; Takehito Hagisawa; Akihiko Chiba; Controlling factors determining flowability of powders for additive manufacturing: A combined experimental and simulation study, Powder Technology, 2021, 393: 482-493. (期刊論文)

· Yufan Zhao; Kenta Aoyagi*; Yohei Daino; Kenta Yamanaka; Akihiko Chiba; Significance of powder feedstock characteristics in defect suppression of additively manufactured Inconel 718, Additive Manufacturing, 2020, 34: 0-101277. (期刊論文)

· Yufan Zhao; Kenta Aoyagi*; Kenta Yamanaka; Akihiko Chiba; Role of operating and environmental conditions in determining molten pool dynamics during electron beam melting and selective laser melting, Additive Manufacturing, 2020, 36: 0-101559. (期刊論文)

· Yufan Zhao; Yuichiro Koizumi*; Kenta Aoyagi; Daixiu Wei; Kenta Yamanaka; Akihiko Chiba; Molten pool behavior and effect of fluid flow on solidification conditions in selective electron beam melting (SEBM) of a biomedical Co-Cr-Mo alloy, Additive Manufacturing, 2018, 26: 202-214. (期刊論文)

· Yufan Zhao; Yuichiro Koizumi*; Kenta Aoyagi; Kenta Yamanaka; Akihiko Chiba; Isothermal γ→ε phase transformation behavior in a Co-Cr-Mo alloy depending on thermal history during electron beam powder-bed additive manufacturing, Journal of Materials Science & Technology, 2020, 50: 162-170. (期刊論文)

· Yufan Zhao; Yuichiro Koizumi; Kenta Aoyagi*; Kenta Yamanaka; Akihiko Chiba; Thermal properties of powder beds in energy absorption and heat transferduring additive manufacturing with electron beam, Powder Technology, 2020, 381: 44-54. (期刊論文)

· Yufan Zhao; Yuichiro Koizumi; Kenta Aoyagi*; Kenta Yamanaka; Akihiko Chiba; Manipulating local heat accumulation towards controlled quality and microstructure of a Co-Cr-Mo alloy in powder bed fusion with electron beam, Materials Letters, 2019, 254: 269-272. (期刊論文)

· Yufan Zhao; Yuichiro Koizumi; Kenta Aoyagi*; Daixiu Wei; Kenta Yamanaka; Akihiko Chiba; Comprehensive study on mechanisms for grain morphology evolution and texture development in powder bed fusion with electron beam of Co–Cr–Mo alloy, Materialia, 2019, 6: 100346. (期刊論文)

· Yufan Zhao; Yujie Cui*; Haruko Numata; Huakang Bian; Kimio Wako; Kenta Yamanaka; Kenta Aoyagi; Akihiko Chiba; Centrifugal granulation behavior in metallic powder fabrication by plasma rotating electrode process, Scientific Reports, 2020, 10: 18446. (期刊論文)

· Yufan Zhao; Yuichiro Koizumi*; Kenta Aoyagi; Kenta Yamanaka; Akihiko Chiba; Characterization of powder bed generation in electron beam additive manufacturing by discrete element method (DEM), Materials Today: Proceedings, 2017, 4(11): 11437-11440. (期刊論文)

· Yujie Cui; Yufan Zhao*; Haruko Numata; Kenta Yamanaka*; Huakang Bian; Kenta Aoyagi; Akihiko Chiba; Effects of plasma rotating electrode process parameters on the particle size distribution and microstructure of Ti-6Al-4 V alloy powder, Powder Technology, 2021, 393: 301-311. (期刊論文)

· Yujie Cui*; Yufan Zhao*; Haruko Numata; Huakang Bian; Kimio Wako; Kenta Yamanaka; Kenta Aoyagi; Chen Zhang; Akihiko Chiba; Effects of plasma rotating electrode process parameters on the particle size distribution and microstructure of Ti-6Al-4 V alloy powder, Powder Technology, 2020, 376: 363-372. (期刊論文)


個人主頁：https://teacher.nwpu.edu.cn/zhaoyufan.html